Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us

Plumbing, pneumatics & electrical

Fittings, hose, terminals and filters — the parts behind the panel and under the sink.

436 bins · 2985 sizes and colours

The plumbing, pneumatics & electrical aisle at the PATIKIL counter

Plumbing, pneumatics & electrical — how we pick and size them

This is the least decorative aisle we have and the one with the strictest numbers. Hose barbs, elbows, tees and quick connect couplers in 4mm to 16mm. Ball valves, check valves and needle valves in brass and stainless. Push-fit connectors, PTFE washers, O-rings by kit, and inline filters for water, air and fuel.

What sits next to what

The electrical half covers low voltage work: ring and spade terminals, butt splices, bootlace ferrules, heat shrink by the pack, cable glands, DIN rail clips, fuse holders and junction boxes. Every piece carries its rated size because a terminal one gauge wrong is a joint that will fail warm. If you are unsure which size is in front of you, measure it before you order — a caliper pays for itself on the first attempt.

Questions we get at the fittings shelf

Are the hose fittings push-fit or threaded?

Both are stocked, and the listing names which, along with the outside diameter of hose it accepts. Mixing the two is the usual cause of a weeping joint.

Do the wire terminals need a crimp tool?

The insulated ring and spade terminals do; screw-down blocks do not. A crimp tool sits in the fasteners aisle, one bay over.

What micron are the inline filters?

From 40 down to 5 micron depending on the model. The figure is in the listing because the wrong one either passes grit or starves the line.

PATIKIL 30 Sets Pure Cotton Watercolor Cards 140lb/300 GSM P$11.60