Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
Copper Pipe Fittings 180 Degree 3/8 IN ID 4Pcs — PATIKIL

Plumbing, pneumatics & electrical

Copper Pipe Fittings 180 Degree 3/8 IN ID 4Pcs

4.1 25 notes

$9.39Low on the shelf

  • Four copper pipe fittings
  • 180-degree return bend
  • Inner diameter 10mm (3/8 inch)
  • 0.8mm wall thickness

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our 180-degree copper pipe fittings help change the direction of your copper pipelines. They are suitable for various plumbing and HVAC applications.

These copper pipe fittings are made from copper, known for its excellent thermal conductivity and corrosion resistance. Each fitting has an inner diameter of 10mm (3/8 inch), a total length of 37mm (1.46 inches), and a wall thickness of 0.8mm. The 180-degree bend design minimizes resistance and pressure loss in your system.

The numbers on the label

What the label says
AislePlumbing, pneumatics & electrical
Options in this bin3 sizes and colours
MaterialCopper
ColorCopper Tone
Inner diameter10mm / 3/8"
Total length37mm / 1.46"
Wall thickness0.8mm
Package list4 × Copper Pipe Fitting
Price across options$9.39 to $19.49
Shelf groupTools & Home Improvement
Rating on the listing4.1 from 25 notes

Who takes it home

These fittings are good for water plumbing, air conditioner, and refrigeration systems where you need to make a tight turn. To install, clean the connection surface thoroughly, then solder the fitting into place. Always confirm the inner diameter you need before ordering.

Next to it on the shelf

Fittings, hose, terminals, filters. Plumbing, pneumatics & electrical holds 436 bins, sorted by price and by what is on the shelf today.

Copper Pipe Fittings 180 Degree 3/8 IN ID 4Pcs $9.39

What makers wrote about this bin

  • Good item

    Petester · 5 of 5

  • I have a 3 zone Pioneer mini-split that blew out a u-bend in the condenser coil (one of the u-bent pipes, very bottom bend on the internal layer of the coil without the steel end plate, not the u-bend fittings brazed on the other side of the coil). It's made up of 10mm copper pipe, not 3/8", so the 3/8" u-bend was a perfect fit (because these are actually metric). Took brazing well (I flowed argon, it's what I had) and got me back in business.

    NPRB · 4 of 5

Next along the same shelf

Copper Pipe Fittings 180 Degree 3/8 IN ID 4Pcs$9.39