Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
45 Degree Bend Elbow Sanitary Exhaust Pipe 3/4" OD — PATIKIL

Plumbing, pneumatics & electrical

45 Degree Bend Elbow Sanitary Exhaust Pipe 3/4" OD

4.4 51 notes

$13.19Low on the shelf

  • One 45-degree mandrel bend elbow
  • 304 stainless steel material
  • 19mm (3/4 inch) outer diameter
  • 50mm (2 inch) single side length

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

This 45-degree mandrel bend elbow helps you route exhaust or fluid lines. It provides a smooth, gradual turn in your piping system.

We make this elbow from 304 stainless steel, which resists heat, oxidation, rust, and corrosion, and has high hardness. It is a single piece, with a 19mm (3/4 inch) outer diameter, 1.5mm thickness, and a 50mm (2 inch) single-side length. The mirror-polished finish keeps it free of contaminants.

The numbers on the label

What the label says
AislePlumbing, pneumatics & electrical
Options in this bin3 sizes and colours
ColorSilver Tone
Material304 Stainless Steel
Single side length length50 mm / 2 Inch
Thickness1.5 mm
Pipe outer diameter19 mm / 3/4 Inch
Packing list1 Pcs x 45 Degree Mandrel Bend Elbow
Price across options$13.19 to $18.99
Rating on the listing4.4 from 51 notes

Who takes it home

Many industries use this elbow, including refrigeration, automotive, HVAC, and food processing. You can weld this stainless steel elbow to your existing pipes to create precise angles. Always confirm your pipe's outer diameter before ordering to ensure a good fit.

Next to it on the shelf

Plumbing, pneumatics & electrical is where we keep it, with 435 neighbours: fittings, hose, terminals, filters.

45 Degree Bend Elbow Sanitary Exhaust Pipe 3/4" OD $13.19

What makers wrote about this bin

  • Perfect for the exhaust job on an old fourwheeler. I ordered the wrong OD but can still make it work.

    Matt S. · 5 of 5

  • Nice quality pipe, welds nicely

    JimmyP · 5 of 5

  • Perfect fit, I needed this for my RV Generator exhaust pipe, which was a 1 1/4 i.d stainless flex pipe. This fits perfectly in the end to turn down the exhaust fumes, quality is good, and it has a decent thickness.

    Jesse Potter · 5 of 5

  • Bought along with Cummins Onan 155-2325 1-1/4" exhaust headpipe, Cummins Onan 155-2449 exhaust resonator, 1.25 Inch Exhaust Pipe T304 Stainless Steel, and Cummins Onan 1552174 Exhaust Hanger. Four stars because it's not quite dimensionally compatible with the Cummins parts. Originally planned on using exhaust clamps to bolt the exhaust together but because it wasn't dimensionally compatible, took the whole thing to an exhaust shop to have fixed instead. The 20 year old Roadtrek 210's Onan Microlite 2800 generator exhaust failed. The system is around 54" long from output on the generator to…

    TWX · 4 of 5

Next along the same shelf

45 Degree Bend Elbow Sanitary Exhaust Pipe 3/4" OD$13.19