Office, craft and home improvement accessories, made by us
Plumbing, pneumatics & electrical
1/8IP Thread Lamp Repair Hardware Assortment Pack, 2 Set
4.6 157 notes$9.99On the shelf
- For repairing and replacing lamp parts
- Zinc-plated carbon steel components
- 1/8IP threaded lamp pipes
- Includes nuts, washers, and plugs
The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.
What this bin holds
This lamp repair hardware kit comes with the threaded pipes, nuts, and washers you need for light fixture repairs. It helps you restore or update chandeliers and other lighting.
You will get two sets of threaded lamp pipe hardware, made from zinc-plated carbon steel, with 1/8IP threading. The kit includes 12 lamp pipes (two each of 20, 40, 50, 100, 200, 300mm lengths), two slotted nuts, 24 regular nuts, 24 flat washers, 24 teeth washers, and 24 black plastic insert plugs. The hollow pipe centers let you run wiring through easily.
The numbers on the label
| Aisle | Plumbing, pneumatics & electrical |
|---|---|
| Options in this bin | 1 sizes and colours |
| Material | Carbon Steel |
| Thread size | 1/8IP |
| Lamp pipe length | 20/40/50/100/200/300mm,0.79"/1.58"/1.97"/3.94"/7.87"/11.8" |
| Sloted hex nut size | 14x30mm / 0.55"x1.18" |
| Nut size | 4mmx14mm / 0.16"x0.55"(T*W) |
| Flat washer size | 10mmx20mm / 0.39"x0.79"(ID*OD) |
| Price across options | $9.99 to $9.99 |
| Rating on the listing | 4.6 from 157 notes |
Who takes it home
Builders and DIYers use these kits for replacing parts in chandeliers or other lamps. The nuts fasten the pipes, and the flat washers help distribute loads for a smooth, secure fit. Remember to install washers before screwing on the nuts, and you can add the black plugs to protect electrical wires inside the pipe ends.
Next to it on the shelf
This bin lives in Plumbing, pneumatics & electrical, one of 436 on that aisle. Fittings, hose, terminals, filters.
1/8IP Thread Lamp Repair Hardware Assortment Pack, 2 Set $9.99
What makers wrote about this bin
Lots of parts, but just what I needed to fix 3 ceiling fans. I needed to lower the light globes so they wouldn’t press against the new LED bulbs. To do that, I needed the longer rods in the kit, which I easily cut to correct length, plus I used the nuts, washers, and special long nuts. Worked perfectly, and the nut and rod threads were a good fit.
RichWords · 5 of 5 Great kit if repairing lamp or light in ceiling.
Ken · 5 of 5 Wow ! You sure do get a lot of parts. If you build or repair lamps these parts come in handy.
Jeff R. · 4 of 5
Next along the same shelf
54 sizes and colours$7.19to $13.99
Multi-Purpose Round Ring Hardware
4.9 31 notesLow on the shelf
49 sizes and colours$7.99to $16.39
16.4 Ft Rubber Tubing, Sling Shot Rubber Tubing Natural Latex
4.5 35 notesLow on the shelf
47 sizes and colours$7.99to $17.69
19 Ft(6M) Rubber Tubing, Natural Latex Rubber Tubing Vinyl Sling Shot
4.7 13 notesLow on the shelf
47 sizes and colours$6.59to $15.49
Metric Sealing Gasket
4.6 157 notesOn the shelf
46 sizes and colours$7.19to $24.29
305mm/ 12 Inch Length, 2 Set
4.7 108 notesLow on the shelf
40 sizes and colours$5.93to $17.69
6mm x 1/8"NPT Male Thread Push
4.6 27 notesLow on the shelf
36 sizes and colours$7.69to $23.89
Clamps, Hangers and U-Bolts
4.8 81 notesLow on the shelf
36 sizes and colours$7.99to $23.49
PATIKIL UPVC Reducer Pipe Fitting 1" x 1/2" Socket Schedule 80, 3 Pack |
4.6 103 notesLow on the shelf