Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
5/16" OD 22x33mm Elbow Copper Pipe Fitting, 5Pcs 180 Degree Bend Welding — PATIKIL

Plumbing, pneumatics & electrical

5/16" OD 22x33mm Elbow Copper Pipe Fitting, 5Pcs 180 Degree Bend Welding

4.1 11 notes

$9.39Low on the shelf

  • 5 copper pipe elbows
  • 5/16 inch (7.94 mm) outer diameter
  • For 180 degree direction changes
  • Smooth finish, no burrs

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our copper pipe elbow fittings help you change the direction of a copper pipeline by 180 degrees. These parts help connect lines in a heat transfer system.

We make these copper pipe fittings from copper stock, which gives them good thermal conductivity. You get 5 pieces in this pack, each with an outer diameter of 5/16 inch (7.94 mm) and a 7 mm inner diameter. The parts are 22 mm long and 33 mm wide, with a 0.5 mm wall thickness. Check your pipe sizes before you order.

The numbers on the label

What the label says
AislePlumbing, pneumatics & electrical
Options in this bin2 sizes and colours
Inner diameter7 mm / 0.28 inch
Outer diameter7.94 mm / 5/16"
Thickness0.5 mm / 0.02 inch
Total length22 mm / 0.87 inch
Total width33 mm / 1.3 inch
Packing list5 Pcs x Copper Pipe Fitting
Price across options$9.39 to $18.19
Rating on the listing4.1 from 11 notes

Who takes it home

People use these copper elbows when installing water plumbing, air conditioners, heat pumps and refrigeration systems. To install, clean the connecting surfaces, then solder the fitting into place. These parts are suitable for oil, water, and gas pipe applications.

Next to it on the shelf

Fittings, hose, terminals, filters. Plumbing, pneumatics & electrical holds 436 bins, sorted by price and by what is on the shelf today.

5/16" OD 22x33mm Elbow Copper Pipe Fitting, 5Pcs 180 Degree Bend Welding $9.39

What makers wrote about this bin

  • Used to route fuel lines on Suzuki Intruder under its fuel tank. Not sure why they aim their lines forward and need a quick turn back, but that is how this bike was designed. These make sure that line is not pinched under tank in area you just cannot see after tank is installed. Did not use as intended, used for what I needed...

    Northwoods Craig · 5 of 5

  • The part was excellent and the delivery was right on time.

    Mikel De Leon · 5 of 5

Next along the same shelf

5/16" OD 22x33mm Elbow Copper Pipe Fitting, 5Pcs 180 Degree $9.39