Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
M10 x 1.0 Steel Hex Nuts — PATIKIL

Fasteners & cutting tools

M10 x 1.0 Steel Hex Nuts

4.3 92 notes

$6.49On the shelf

  • M10 x 1.0 metric thread
  • Zinc-plated carbon steel
  • 14mm hexagon width
  • 4mm total height

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our M10 x 1.0 steel hex nuts help fasten parts together. They pair with bolts, screws, and other external-thread components for secure assemblies.

These metric thread hex nuts come in a silver tone, made from zinc-plated carbon steel. They have an M10 x 1.0 thread size, a 14mm hexagon width, and a total height of 4mm. The zinc plating makes them more durable and resistant to wear, and the hexagon head lets you tighten them easily with a wrench.

The numbers on the label

What the label says
AisleFasteners & cutting tools
Options in this bin3 sizes and colours
ColorSilver Tone
MaterialZinc Plated Carbon Steel
Thread sizeM10 x 1.0
Hexagon width14mm / 0.55 inch
Total height4mm / 0.16 inch
Price across options$6.49 to $8.89
Shelf groupTools & Home Improvement
Rating on the listing4.3 from 92 notes

Who takes it home

You will find these hex nuts useful for many fastening jobs, from machinery repair to DIY projects. They work well for assembling lighting fixtures like chandeliers and lamps. To install, simply screw them onto bolts or screws directly to secure the parts. Remember to confirm the thread size of your existing bolts.

Next to it on the shelf

Walk the rest of Fasteners & cutting tools — 215 bins in all. Washers, screws, blades, files.

M10 x 1.0 Steel Hex Nuts $6.49

What makers wrote about this bin

  • Well done

    c largin · 5 of 5

  • worked greatt. and a 1000% less cost than bmw

    the Cheapest man on earth · 5 of 5

  • Yes, They fit perfectly. Thank you

    Brian Cook · 5 of 5

  • Correct thickness, proper finish for a jam nut, locked in well. The only thing that prevented a 5-star rating was that the outer edge of the side of the nut facing the plate to be locked (the flat side of the nut) was unnecessarily rough, scoring the surface of the plate to be jammed.

    Shotnoise · 4 of 5

Next along the same shelf

M10 x 1.0 Steel Hex Nuts$6.49