Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
Graphite Stirring Rod, Pack of 5, 150x8mm — PATIKIL

General craft room

Graphite Stirring Rod, Pack of 5, 150x8mm

4.1 43 notes

$14.99On the shelf

  • Five graphite rods are included
  • Each rod 150 mm long, 8 mm diameter
  • High purity, high strength graphite
  • Resistant to heat and corrosion

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our graphite stirring rods are ready for your casting projects. They are useful for stirring liquid metals like silver, gold, and copper, or as electrodes.

This is a pack of five graphite stirring rods. Each rod is 150 mm (5.9 inches) long and 8 mm (0.31 inch) in diameter. We make these rods from high-purity, high-strength graphite, giving them a smooth surface, good electrical conductivity, and high resistance to heat and corrosion.

The numbers on the label

What the label says
AisleGeneral craft room
Options in this bin1 sizes and colours
Package content5pcs x Graphite Rod
Size(length*diameter)150x8mm/5.9x0.31 inch
Price across options$14.99 to $14.99
Rating on the listing4.1 from 43 notes

Who takes it home

Metal casters and jewelers will find these rods helpful for stirring molten metals. To maintain a safe distance from the heat, consider attaching the graphite rod to a longer iron rod or wooden chopstick when stirring.

Next to it on the shelf

This bin lives in General craft room, one of 499 on that aisle. Glue guns, mats, trays, kits.

Graphite Stirring Rod, Pack of 5, 150x8mm $14.99

What makers wrote about this bin

  • My son used this for his STEM Science project. He was measuring conductivity and energy from common food waste. It works pretty well and his project even won the Blue Ribbon at our County Science Expo.

    Arkidon · 5 of 5

  • I used this for a Bernina sewing machine foot pedal it had 2- carbon tracers/electrodes in it at $11.51 a piece. I decided to buy this cut it down by etching it with a file then it snapped clean off down to 1/2 inch pieces. The Bernina carbon tracers were milled down at the end to hold the springs in. I simply drilled out the end to accept a straight piece of carbon verses a milled down piece. The pedal works as good as new. I have several to compare it to . It was a Bernina 290 foot pedal

    Jim Smith · 5 of 5

  • Perfecto. Envio rapido. Gracias.

    jfloressantos · 5 of 5

Next along the same shelf

Graphite Stirring Rod, Pack of 5, 150x8mm$14.99