Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
Circuits, Grounding — PATIKIL

Adhesives, sealants & lubricants

Circuits, Grounding

4.5 87 notes

$5.35Low on the shelf

  • 10mm wide, 10 meters long
  • 0.05mm thick copper foil
  • Temperature resistant -10°C to 120°C
  • Good for EMI/RFI shielding

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our copper foil tape creates a low-resistance path, essential for grounding circuits and blocking electromagnetic interference. We use it for electrical repairs, RFI signal blocking, and ESD/EMI shielding.

This copper tape is made from highly conductive copper foil, measuring 10mm wide, 10 meters long, and 0.05mm thick. It handles temperatures from -10°C to 120°C. The stable electrical conductivity helps eliminate electromagnetic interference (EMI) and radio-frequency interference (RFI) in your projects.

The numbers on the label

What the label says
AisleAdhesives, sealants & lubricants
Options in this bin35 sizes and colours
Length10 Meter/11 Yards
Width10mm/0.39 inch
Thickness0.05mm/0.002 inch
ColorCopper Tone
Price across options$5.35 to $32.19
Rating on the listing4.5 from 87 notes

Who takes it home

Builders, hobbyists, and artists choose this tape for stained glass, art decoration, and DIY crafts. It's flexible, so you can twist, bend, and tear it easily to fit irregular surfaces without extra tools. Always check the surface is clean and dry before applying for best adhesion.

Next to it on the shelf

Glues, tapes, sealants, oils. Adhesives, sealants & lubricants holds 96 bins, sorted by price and by what is on the shelf today.

Circuits, Grounding $5.35

What makers wrote about this bin

  • On a CLEAN surface, the adhesive works very well. I ran a test using an iron set to 800+ degrees (F) and everything went perfectly. (I'd imagine if it's KEPT that hot for too long, the glue would melt off the copper - as would any.) As @Jason put it... it's sticky... it's copper... !

    TJ · 5 of 5

  • Product is exactly how described. It's great and handy and works perfectly for conducting energy to a different light up diodes.

    Jeff Stanger · 5 of 5

  • Works great to short some pins on a cpu

    loll70 · 5 of 5

Next along the same shelf

Circuits, Grounding$5.35