Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
70mm/2.88" Diameter Metal Ceiling Hole Cover Plate 2Pcs Matte White — PATIKIL

General craft room

70mm/2.88" Diameter Metal Ceiling Hole Cover Plate 2Pcs Matte White

4.4 189 notes

$12.69Low on the shelf

  • For holes 35-55 mm (1.4-2.2 inches)
  • Carbon steel with matte white finish
  • 70 mm (2.8 inches) outside diameter
  • No tools or adhesives needed

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our matte white metal ceiling hole covers help you tidy up your finished work. They hide unsightly holes and cracks on walls, glass or other surfaces, leaving a clean appearance.

These ceiling hole cover plates are made from carbon steel, which keeps them from deforming easily. We use a high-temperature baking paint process for a smooth, textured finish that resists corrosion and rust. Each plate is 70 mm (2.8 inches) in diameter and 1 mm (0.04 inches) thick, with a 30 mm (1.2 inch) cutout opening.

The numbers on the label

What the label says
AisleGeneral craft room
Options in this bin6 sizes and colours
MaterialCarbon Steel
ColorMatte White
Applicable hole diameter35-55mm/ 1.4-2.2inch
Front plate size70 x 1mm/ 2.8 x 0.04 inch（OD*T)
Cutout opening diameter30mm/ 1.2 inch
Height23.5mm/ 0.9 inch
Package list2 x Ceiling Cover Plate
Price across options$12.69 to $21.99
Shelf groupTools & Home Improvement
Rating on the listing4.4 from 189 notes

Who takes it home

These cover plates are for anyone needing to conceal holes in drywall or gypsum board after removing an old light fixture, or covering an unused opening. Check your hole size carefully before ordering; these plates work best on holes between 35 mm and 55 mm.

Next to it on the shelf

This bin lives in General craft room, one of 499 on that aisle. Glue guns, mats, trays, kits.

70mm/2.88" Diameter Metal Ceiling Hole Cover Plate 2Pcs Matte White $12.69

What makers wrote about this bin

  • I purchased these PATIKIL ceiling hole covers to temporarily fill two openings in my living room ceiling that I created for future surround sound speakers. The wiring is already in place, but I'm not ready to install the speakers yet, so I wanted something that would close the holes while still allowing easy access when I'm ready to finish the project. I installed the covers the same day I received them. These worked exactly as I hoped. My ceiling openings are 4 inches in diameter, and the 4.7-inch covers completely concealed the holes while leaving a clean, finished appearance. One of the…

    Eric G · 5 of 5

  • When the plumber had to replace my refrigerator line, he had to cut several holes in the ceiling of a basement room. I bought these to plug the holes, not wanting to drywall because I knew that they may need access again. These were so perfect for that purpose. So easy to install.

    Katbron · 5 of 5

  • work Ok to cover up where I removed old faded eyeball recessed lights. were a Pain to install and do not center on the recessed housing so pay attention otherwise you gotta climb back up the ladder to adjut them to cover hole all around Also have to play with them to sit flat against ceiling and not have little gaps on edge. They do match ceiling paint fine as they are matte to start with so you could paint if you do not have white ceiling I guess. latex might not like them so spray with some primer.

    ygmn · 4 of 5

  • I used the hole covers to hide 5 inch diameter drywall ceiling holes. I made the holes to aid in routing a starlink antenna cable from the outside where the antenna is to inside office area where the router is. I can fit my arm into the holes They are in a closet with a white ceiling. They are in plain view but are now hardly noticeable with the covers installed. I am impressed with the design, ease of use and metal material used to make them. Also the covers are easily removed in case it is necessary. Very please this product.

    Camille Poe · 5 of 5

Next along the same shelf

70mm/2.88" Diameter Metal Ceiling Hole Cover Plate 2Pcs Matt$12.69