Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
6061 T651 Aluminum Sheet Metal 4 x 1.18 x 1/16(0.0625") Inch 3Pcs Flat — PATIKIL

General craft room

6061 T651 Aluminum Sheet Metal 4 x 1.18 x 1/16(0.0625") Inch 3Pcs Flat

4.5 203 notes

$5.79Low on the shelf

  • 3 pieces of 6061-T651 aluminum
  • Each piece is 4 x 1.18 x 1/16 inches
  • High hardness and corrosion resistance
  • Brushed effect finish

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

We offer these 6061-T651 aluminum sheet metal pieces for your engineering and structural projects. They provide high strength and corrosion resistance.

You get three pieces of 6061-T651 aluminum sheet metal, each measuring 4 x 1.18 x 1/16 inches (101.6 x 30 x 1.5mm). This aluminum alloy has high hardness and corrosion resistance, suitable for demanding applications. All surfaces have a brushed finish.

The numbers on the label

What the label says
AisleGeneral craft room
Options in this bin70 sizes and colours
SizeThe aluminum sheet comes with 3 pcs, each measures 4 x 1.18 x 1/16(0.0625") Inch/101.6 x 3
Price across options$5.79 to $49.49
Rating on the listing4.5 from 203 notes

Who takes it home

These aluminum sheets are used in various industrial structural parts that require strength and weldability, such as for trucks, scaffolding, and mechanical components. They are also suitable for decoration, packaging, and aerospace applications. Please be careful as the edges can be sharp.

Next to it on the shelf

This bin lives in General craft room, one of 499 on that aisle. Glue guns, mats, trays, kits.

6061 T651 Aluminum Sheet Metal 4 x 1.18 x 1/16(0.0625") Inch 3Pcs Flat $5.79

What makers wrote about this bin

  • A+

    Lewis Wu · 5 of 5

  • I had carpenter bees chewing enormous holes in my fence posts. These were easy to drill holes in with ordinary drill bits and use them as patches.

    Catpeas · 5 of 5

  • Handy aluminum sheet. If you have to put any sharp bends in the metal just be aware it's a little softer type of metal. Use proper bending practices otherwise the metal will split at the bend.

    DJN · 5 of 5

  • Three pieces of aluminum, all scuffed on at least one edge and only two pieces were of advertised size. The third was 5mm short and one edge was cut at an angle. Protective film was partially peeled off, but most of the surface remained clean and scratch-free. Reasonably priced. Gauge was accurate for all three pieces.

    A. Walls · 4 of 5

Next along the same shelf

6061 T651 Aluminum Sheet Metal 4 x 1.18 x 1/16(0.0625") Inch$5.79