Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
6-10mm Diamond Tile Hole Saw Kit 15/64" — PATIKIL

Fasteners & cutting tools

6-10mm Diamond Tile Hole Saw Kit 15/64"

5.0 2 notes

$8.89Low on the shelf

  • Five diamond hole saws included
  • Two 15/64" (6mm), two 5/16" (8mm)
  • One 3/8" (10mm) hole saw
  • For tile, marble, ceramic, quartz

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

We put together this diamond tile hole saw kit for drilling clean, precise holes. It helps you get through tough materials where a standard drill bit would struggle.

This set includes five diamond hole saws: two 15/64" (6mm) bits, two 5/16" (8mm) bits, and one 3/8" (10mm) bit, all with 50/60 diamond mesh. Each bit has a high-strength steel body that resists deformation and premium diamond grit for lasting sharpness. We also build in wax, so you can start drilling without adding water.

The numbers on the label

What the label says
AisleFasteners & cutting tools
Options in this bin1 sizes and colours
Packing list2pcs 15/64"(6mm), 2pcs 5/16"(8mm), 1pc 3/8"(10mm) to meet various drill needs for precise
Price across options$8.89 to $8.89
Rating on the listing5.0 from 2 notes

Who takes it home

Our diamond hole saws are for anyone working with medium to high hardness materials like tile, marble, or quartz. These bits fit hand drills and other rotary tools. Start drilling at a 45-degree angle, then move to a vertical position; a gentle circular motion can help you cut faster.

Next to it on the shelf

This bin lives in Fasteners & cutting tools, one of 215 on that aisle. Washers, screws, blades, files.

6-10mm Diamond Tile Hole Saw Kit 15/64" $8.89

What makers wrote about this bin

  • I ordered this diamond bit set by PATIKIL to drill through ceramic backsplash tile in order to hang an over-the-range microwave at a renovation project I’m working on. Some of the microwave screws went into studs and others needed toggle bolts to secure it, so I appreciate the range of sizes that this diamond bit set came with. At five bits, the set is a great value. I like how each bit is stored in a plastic threaded tube labeled with the bit size. Although each bit is also labeled, if you drill, you know that the writing on the bits themselves can become worn away with use, so having the…

    Amelie_Flowers · 5 of 5

  • If you have never used these style of bits there's a bit of a learning curve compared to the typical tile or glass bit. First, the speed is and pressure will depend on the type of material you are drilling into, so going slower should be preferable to full throttle. Second, using water is recommended to keep the bit clean and cool. You should also move to different holes or stop every 5 to 10 seconds to let the bit and material being drilled to stay cool. The final thing is that you have to start at an angle and then straighten out after you begin to cut. You don't want to start dead on or…

    LayloBrown · 5 of 5

Next along the same shelf

6-10mm Diamond Tile Hole Saw Kit 15/64"$8.89