Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
4" Ceiling Light Plate Kit, 4 Pack Light Crossbar Mounting Bracket — PATIKIL

Fasteners & cutting tools

4" Ceiling Light Plate Kit, 4 Pack Light Crossbar Mounting Bracket

4.6 52 notes

$8.59Low on the shelf

  • For installing and repairing light fixtures
  • Zinc-plated carbon steel, 1.2 mm thick
  • 100 mm long, 94 mm mounting hole distance
  • For M10x1mm lamp pipes

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

Our 4-pack of ceiling light plates helps you install a new light fixture or repair an existing one. These mounting brackets give your light a solid anchor point.

These light crossbars are made from 1.2 mm thick zinc-plated carbon steel, so they will not deform, rust, or break. Each bracket is 100 mm long with a 94 mm mounting hole distance, an 11 mm center hole, and fits M10x1mm lamp pipes. We include all the necessary hardware for a quick setup.

The numbers on the label

What the label says
AisleFasteners & cutting tools
Options in this bin2 sizes and colours
MaterialCarbon Steel (Zinc-plated)
Thickness1.2mm / 0.05"
Total length100mm / 4"
Center hole diameter11mm / 0.43"
Lamp pipe sizeM10x1mm, 40mm
Mounting screw length26mm / 1.02"
Package list4 x Light Crossbar, 4 x Lamp Pipes, 4 x Ground Screws, 8 Set x Mounting Screws Parts, 4 x
Price across options$8.59 to $9.49
Shelf groupHome
Rating on the listing4.6 from 52 notes

Who takes it home

These light fixture plates work with many different lights, from crystal lamps to LED lights, wall lamps to pendant lights. Before you start your project, take a moment to confirm you have all the parts in your kit.

Next to it on the shelf

Walk the rest of Fasteners & cutting tools — 215 bins in all. Washers, screws, blades, files.

4" Ceiling Light Plate Kit, 4 Pack Light Crossbar Mounting Bracket $8.59

What makers wrote about this bin

  • Good product for the price. Much less expensive than buying these at a big box store.

    Richmond · 5 of 5

  • Just as described, only down side I only needed one.

    Scott A. Menotti · 5 of 5

Next along the same shelf

4" Ceiling Light Plate Kit, 4 Pack Light Crossbar Mounting B$8.59