Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
4.7mm Drill Bit M2 High-Speed Steel 135° TiN Coated 2Pcs — PATIKIL

Fasteners & cutting tools

4.7mm Drill Bit M2 High-Speed Steel 135° TiN Coated 2Pcs

4.6 192 notes

$5.89On the shelf

  • Two 4.7mm M2 HSS drill bits
  • 135° split point tip
  • Titanium nitride (TiN) coated
  • For medium and high hardness metal

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

These 4.7mm drill bits are crafted from M2 high-speed steel, designed for efficient and precise drilling in various metal applications. Their TiN coating extends tool life by preventing corrosion.

You receive two drill bits, each with a 4.7mm cutting diameter, a 53mm flute length, and an 85mm overall length. The 135° split point tip and titanium nitride (TiN) coating enhance durability and performance, allowing them to machine medium and high hardness metals effectively.

The numbers on the label

What the label says
AisleFasteners & cutting tools
Options in this bin11 sizes and colours
Packing list2 packs of drill bits in 4.7mm cutting diameter, 53mm/2.09inch flute length, 85mm/3.35inch
Price across options$5.89 to $8.59
Rating on the listing4.6 from 192 notes

Who takes it home

These high-speed steel drill bits are suitable for machinists and hobbyists working with low to medium-carbon steel, alloy steel, stainless steel, cast iron, and aluminum alloys. For best results, use cutting fluid and adjust spindle speed based on material hardness.

Next to it on the shelf

This bin lives in Fasteners & cutting tools, one of 215 on that aisle. Washers, screws, blades, files.

4.7mm Drill Bit M2 High-Speed Steel 135° TiN Coated 2Pcs $5.89

What makers wrote about this bin

  • Purchased this for a specific use. I dabble with golf club repair, and when replacing shafts, sometimes the only way to remove the old shaft is to bore out the hosel . Many woods use shafts with .335 diameter tips, so an 8.5 mm bit matches that size within .00035 of an inch. This is much closer than you can get to the exact hosel bore size than using a bit delineated in 32nds of an inch, or even 64ths. So this bit allows cleaning the hosel bore to almost its exact original size and cleaning out all old shaft material without enlarging it. For a specialty use like this, the 8.5mm drill bit is…

    Gregory S. Wanner · 5 of 5

  • Work great in wood. Surprised when I discovered there were two in the package.

    Q. D. · 5 of 5

  • Works as designed!

    ASIMERAL · 5 of 5

  • excelente

    pedro m. · 5 of 5

Next along the same shelf

4.7mm Drill Bit M2 High-Speed Steel 135° TiN Coated 2Pcs$5.89