Every bin here is ours — we make it and we pack itSizes measured at our own bench, not copied from a cataloguePrice on the label is the reading we took, with its date
PATIKILOffice, craft and home improvement accessories, made by us
3.5mm Drill Bit Jobber Straight Shank M2 TiN Coated 4Pcs — PATIKIL

Fasteners & cutting tools

3.5mm Drill Bit Jobber Straight Shank M2 TiN Coated 4Pcs

4.6 192 notes

$5.49Low on the shelf

  • Four 3.5mm jobber drill bits
  • M2 high-speed steel material
  • Titanium nitride (TiN) coated
  • For various metal drilling applications

Pick the size or colour

The stamp below follows whichever option is lit.

The stamp hands you over to the listing where this bin is actually sold. The price and the stock state you see there are the ones that count.

What this bin holds

These 3.5mm jobber drill bits are designed for drilling into various metals. They deliver reliable performance for your workshop tasks.

You get four 3.5mm drill bits made from M2 high-speed steel. Each bit has a 39mm flute length and a 70mm overall length, with a 135-degree split point tip. The titanium nitride (TiN) coating helps prevent corrosion and extends the life of the bit.

The numbers on the label

What the label says
AisleFasteners & cutting tools
Options in this bin31 sizes and colours
Packing list4 packs of drill bits in 3.5mm cutting diameter, 39mm/1.54inch flute length, 70mm/2.76inch
Price across options$5.49 to $29.99
Rating on the listing4.6 from 192 notes

Who takes it home

These drill bits work well for most metal drilling, including low to medium carbon steel, alloy steel, stainless steel, cast iron, and aluminum alloys. When drilling, position the bit at 90 degrees to the workpiece. For thick materials, drill in multiple passes.

Next to it on the shelf

Fasteners & cutting tools is where we keep it, with 214 neighbours: washers, screws, blades, files.

3.5mm Drill Bit Jobber Straight Shank M2 TiN Coated 4Pcs $5.49

What makers wrote about this bin

  • Purchased this for a specific use. I dabble with golf club repair, and when replacing shafts, sometimes the only way to remove the old shaft is to bore out the hosel . Many woods use shafts with .335 diameter tips, so an 8.5 mm bit matches that size within .00035 of an inch. This is much closer than you can get to the exact hosel bore size than using a bit delineated in 32nds of an inch, or even 64ths. So this bit allows cleaning the hosel bore to almost its exact original size and cleaning out all old shaft material without enlarging it. For a specialty use like this, the 8.5mm drill bit is…

    Gregory S. Wanner · 5 of 5

  • Work great in wood. Surprised when I discovered there were two in the package.

    Q. D. · 5 of 5

  • Works as designed!

    ASIMERAL · 5 of 5

  • excelente

    pedro m. · 5 of 5

Next along the same shelf

3.5mm Drill Bit Jobber Straight Shank M2 TiN Coated 4Pcs$5.49